Rear Beam Mounting Bushing

  • Model: PFR85-610 x2
  • Manufactured by: Powerflex


Please Choose:

Add to Cart:

You're a hard-charging street driver that might do do autocross or track events on weekends? If so, predictable handling at the traction limit is needed. But, you won't tolerate a jarring ride or demands for continuous maintenance. OEM rear beam bushings are squishy to start with and dry rot or otherwise loose over time. Ditch these worn out parts and replace with these rigid parts from Powerflex!

Powerflex PFR85-610 bushing

Brake much more deeply and aggressively into corners while the car tells you what's going on regarding rear traction. Enjoy more consistent handling at mid-corner when loads are highest on the tires. Soft rubber bushings deflect under load and allow suspension geometry to distort terribly. -not so with stiff polyurethane.

Powerflex PFR85-610 rear beam bushing

Ride quality is not affected much compared to stock parts except on choppy surfaces where harshness does increase within acceptable limits. Noise and vibration are not changed substantially. Put these to work with our Camber/Caster Plates and Front Control Arm Bushing kits for a superb street and light race setup.

Powerflex PFR85-610 polyurethane Mk4 VW bushing



Rear Beam Mounting Bushing (5)
These bushings are sold in the required number for one car for the specified location.

Current Reviews: 2

Copyright © 2021 Usually Sideways Rally Team. Powered by Zen Cart