FLOWsafe System (8AN Compact)

SUCK IT UP with 8AN. SEE the data. Enjoy no restriction feeding a water/meth injection pump. Inform an controller or ECU. Supplied along with the failsafe flow sensor are 24" (60cm) of black braided hose and an array of carefully angled 8AN fittings.

8AN braided hose + fitting assembly 8AN braided hose + 8AN female flare fittings
8AN hose + 8AN female flare for water methanol 8AN female flare x female hose for water meth kit

This kit upgrades our Compact Street Tank (which is offered separately). It is compatible with pumps with 3/8 threaded tops.

USRT WMI failsafe sensor data

Connect to 12V and ground. Hall effect sensor output is a 12V square wave signal. Send that to an advanced water/meth controller or ECU. Flow rate is proportional to frequency (and is predictably linear from 1 - 20Lpm). 

USRT water meth tank, pump, + failsafe system

A ruptured or disconnected hose downstream of sensor always results in massive flow rates. Whereas, a leak before the sensor will produce a notable decrease. As will any blockage in the system. Set upper and lower flow parameters in the controller and a powerful failsafe system is yours to trust.

USRT 8AN failsafe for BMS water meth tank

The FLOWsafe sensor fits between tank and water meth injection pump. USRT's BIG BORE Outlet is shown above it with 400psi FAILSAFE Pressure Sensor attached.

USRT water methanol tank + failsafe sensor

Rubber pads are included to reduce vibration and noise transmitted to the vehicle. Extra clearance is provided for mounting on uneven surfaces.
USRT water meth tank rubber mounting pads

Tech notes: Inlet restriction and cavitation are eliminated via LARGE diameter flow path. Placement before the pump ensures that pulsation from fast solenoid valves does not corrupt data.


Add to Cart:

Ask a Question

  • Manufactured by: US Rally Team

Contact USRT

  • +1(856)456-3335
  • Hainesport, NJ 08036
  • Email Us

Hours: Monday-Friday 9-5 EST

Copyright © 2024 Usually Sideways Rally Team