AEM WMI Pump (3/8)

Our entry level pump has provisions for 3/8 fittings. This makes plumbing easy with a range of quality options. Output pressure is stable up to about 220psi with nozzle flows up to 375cc. Atomization is decent at this pressure and facilitates proper evaporation rates for proper cooling and more even distribution to cylinders. Initial current draw is about 11A. This tapers down to about 4-5A depending on duty cycle.

For the either input or output sides, this straight 1/4 compression x 3/8 NPT fitting is certainly the simplest.

High flow applications with thick wall tanks will be best served with our DEEP THIRST Pump Inlet Kit because it uses 3/8" line instead of 1/4".

Several solutions are now offered for the output. This filtered gauge outlet  kit is our most popular. Set up your system in a manner that works best for the particular application.

This configuration is now a standard feature in our "TRUTH" (WMI Base Kit) combines a cleanable mesh screen inside 4AN housing and also mounts a pressure gauge to allow dialing in the pump properly.

Whereas, the FAILSAFE Filtered Outlet System is the most advanced outlet setup that we offer. It adds a pressure sensor for feedback to a standalone ECU or advanced controller (for example, the Cortex EBC).