Manufacturers

Power Steering Rack Mount (15mm bracket)

  • Model: PFF85-234 x1
  • Manufactured by: Powerflex

$25.00

Add to Cart:

This poly rack bushing fits LHD ZF power steering racks and improves steering sensitivity plus response. Increase your FEELING and thusly improve what you're DOING.

Think about it. You’re charging hard towards a corner. Smoothly you back off the gas pedal while turning in towards the… apex that comes up quick! It slips behind you and you ease on some throttle while unwinding the wheel. Then, the steering goes light without warning AND ssSSLIP! Hey!

Speed is scrubbed, the car understeers outwards, and after some tire screeching, the numb non-communicative feeling returns to the steering wheel in your trembling hands. It doesn’t have to be this way!

Stock rack bushings are supplied soft so as to isolate driver and passenger from any vibration. The steering rack is thusly able to deflect out of alignment as the bushings squish during cornering. The car is unable to pass on critical information that the sport driver would otherwise feel through his or her hands. Stiff polyurethane rack bushings eliminate this deflection. They restore steering geometry and tell the driver what’s going on where the rubber meets blacktop.  

Sport driving is rewarded when the driver can feel the edge of traction and slip. It is at this razor’s edge where the driver, machine, and road are perfectly balanced. Speed and confidence are maximized. These bushings aren’t the most expensive modification, but to the aggressive driver they are treasure. Combine with solid bronze subframe bushings for serious steering precision. Then step up to these tubular control arms for an ultimate performance solution!


Power Steering Rack Mount

Increase your car's handling performance by getting rid of the soft rubber stock bushings. These Powerflex urethane replacements will improve performance, prolong tire life, and bring older cars back to life!

Bushings are sold in the required number for one car for the specified location.

Note: Chassis Code 1H-N-000 001 Through 1H-W-500 000
Note2: Fits 15mm bracket with inner diameter of 49.5mm to suit LHD ZF power steering racks. For 44mm diameter steering racks and an 18.5mm wide bracket use PFF85-232.  For 44mm diameter steering racks and a 15mm wide bracket use PFF85-233.  Bushing replaces OEM part number: 191422884A.



Copyright © 2019 Usually Sideways Rally Team. Powered by Zen Cart