Rugged simplicity = VERY GOOD. This "quick fit" kit is a down-and-dirty mounting solution for fan to radiator. Or, mount a light heat exchanger to a main radiator or AC condenser.
The package includes 4 mounting tie assemblies and four pieces of cushion material. The ties are similar to zip-tie wire ties, but with a large-diameter head and a separate large-diameter receptacle. Just slip a tie into a hole in the fan shroud, add a piece of cushion material, and thread the tie between your radiator fins. Insert the tie into the receptacle washer and pull tight. Repeat on the other three corners of the shroud and you're done!
This kit can be used to mount an electric fan to a radiator, AC condenser, or oil cooler. It can also be used to mount a rock screen or grille in front of your radiator or cooler (we recommend adding thicker, denser padding and some spacers for this type of installation). You can even use it to secure a blanking plate in front of your radiator or cooler in cold weather, but the ties are not reusable.
Note: Oil hoses must be well-supported and not add load/strain upon the heat exchanger itself. Race (especially rally) cars using larger than 16-row+ should use two mounting kits per cooler.
