Mocal 16 Row Heat Exchanger

Application: High-output street/moderate race engines. Mocal 16-row Heat Exchanger. 235mm width, -10AN fittings.

Mocal oil cooler kit from USRT = VW racing reliabilityOptions abound with respect to mounting solutions. With an AC condensor removed, there is typically room on Mk2 and newer vehicles for the heat exchanger to be mounted directly in front of the radiator. When a condensor is present, however, a builder must be more creative. So long as air can pass through it and ground-based dangers are not a factor, an exchanger will work optimally.

Mocal 16-row bar & plate oil cooler for racing engines Mocal 16-row oil cooler with 10AN fittings Mocal oil heat exchanger for automobile racing

In tightly packed Mk4s, we have placed the unit directly in front of the passenger's side tire with a window cut out of the well liner. High-pressure air is ducted from the bumper, through the cooling fins, and out into the well which is a low-pressure zone.

USRT Mocal 16-row oil cooler for VW MK4 1.8T

In cases where air flow is not easily sourced or produced, the piece can serve as a heat sink only. Peak cooling capacity and performance over time will not be at their best, but a meaningful improvement can still be made.

VW Mk4 oil cooler ducting

$169.00

Add to Cart:

Ask a Question

  • Model: OILCOOLER16
  • Manufactured by: Mocal

Contact USRT

  • +1(856)456-3335
  • Hainesport, NJ 08036
  • Email Us

Hours: Monday-Friday, 10-4 EST

Copyright © 2024 Usually Sideways Rally Team