Manufacturers

VW/Audi Dual Nozzle & Throttle Spacers

Nozzle location is one of the most important variables that directly affect how an injection system functions. Put our CNC-machined aluminum spacer plates to work in your vehicle for a safe and convenient nozzle mounting solution. Follow tech advice below to dial in your benefits package!

Tech:
There's only but so much humidity that a unit volume of air at a given starting temperature can possibly absorb in a given period of time. A single very large nozzle will oversaturated the intake air with humidity. Then it will "precipitate". In plain English, that means that it will literally rain inside the intake piping as the fluid falls out of suspension and coats the walls. When this occurs there is no cooling, no octane boost, and the owner may run the risk of damaging engine internals.

Mounting a nozzle just after the intercooler provides maximum distance traveled from the spray point to the combustion chamber. This ensures that the mist is carried by the air for a longer time period. More time allows for more complete evaporation. More evaporation guarantees more cooling.

A throttle body-mounted nozzle works exactly the same way but in reverse. Less distance traveled = less evaporation = more droplets ready to turn to steam INSIDE the combustion chambers. This reduction in combustion temperature boosts the air/fuel charge's octane rating in a huge and very beneficial way. Of course, one may run a single medium-sized nozzle midway between the two ends. This delivers a compromised mix of both cooling and octane vs. maximum amounts of both. Special care must be taken to ensure that liquid droplets do not reach a drive by wire throttle body. (This is a non-issue for drive by cable throttles.)

SO, should you run one or two nozzles? You should run two IF your budget allows. If not, you will still be delighted with the performance of a single nozzle. Size that nozzle responsibly to achieve excellent results.

Nozzle sizing advice:
Flow rates MUST be dialed in to match total fuel requirement, boost levels, and intercooling setup. Please contact USRT for help with this critical aspect of kit configuration. Other companies randomly provide nozzles that they have in stock with the lazy and false assumption that "one size fits all" applications. They abandon the user to to determine final setup on their own via trial and error. Dyno time is expensive and so are engine internals. Consult with our tech support to get it right from the very beginning.

E6000 Thread Sealant

E6000 Thread Sealant

E6000 is a tough, flexible and highly versatile adhesive that exhibits exceptional adhesive and sealant qualities. -PERFECT for sealing NPT threads...
$2.00
Add:
1.8T/2.0l 8V Throttle Body Gasket

1.8T/2.0l 8V Throttle Body Gasket

Grab two of these to replace what we supply  in our plate kits. Parts priced each (not in pairs as pictured).
$5.00
Add:
CHECK TEE

CHECK TEE

  The CHECK TEE incorporates a pressure-activated check valve. No longer does one need a post-IC nozzle holder with check valve built-in. Nor is...
$40.00
... more info
1.8T/2.0l 8v Throttle Body Flange

1.8T/2.0l 8v Throttle Body Flange

These flanges are the same as are included in the dual nozzle mount packages. Intended to mount a water/meth injection nozzle for detonation...
$55.00
Add:
Audi A4/Passat 1.8T Throttle Body Flange

Audi A4/Passat 1.8T Throttle Body Flange

These flanges are the same as are included in the dual nozzle mount packages. Shared with VR6 OBD2 examples, the center hole measures...
$55.00
Add:
Boost Trigga

Boost Trigga

Need a simple and dependable way to activate your direct port or pre-compressor water methanol injection system? Or, perhaps you'd like to turn...
$55.00
Add:
VR6 12v OBD2 Throttle Body Flange

VR6 12v OBD2 Throttle Body Flange

These flanges are the same as are included in the dual nozzle mount packages. Intended to mount a water/meth injection nozzle for detonation...
$69.00
Add:
2.0l TSI/FSI Throttle Body Flange

2.0l TSI/FSI Throttle Body Flange

These flanges are the same as are included in the dual nozzle mount packages. Intended to safely mount a water/meth injection nozzle for...
$75.00
Add:
Mk4 R32 Throttle Body Flange

Mk4 R32 Throttle Body Flange

These flanges are the same as are included in the dual nozzle mount packages. Intended to mount a water/meth injection nozzle for detonation...
$75.00
Add:
Rabbit 2.5l Throttle Body Flange

Rabbit 2.5l Throttle Body Flange

These flanges are the same as are included in the dual nozzle mount packages. Intended to mount a water/meth injection nozzle for detonation...
$75.00
Add:
Copyright © 2022 Usually Sideways Rally Team. Powered by Zen Cart