This is the usual 1/4" (.172" or 4.37mm ID) tubing that you already know and love. It's safe for pressure through 400+psi (when paired...
$1.25
Add:
Small-diameter 3/16" (.125" or 3.18mm ID) hose usage results in more control precision and less dripping . Exceed the norm. Disrupt the...
$2.50
Add:
These 1/4" compression fittings are NEW TECH made from 304 stainless steel. They connect to 1/4" main supply hose and operate leak-free ....
$5.00
Add:
USRT's 3/16" compression fittings work with small-diameter nozzle connection hose and operate leak-free . Old school push-to-connect drips...
$5.00
Add:
Allow or disallow flow at up to 370psi and establish air cooling only mode vs. cooling + octane. Or, use when a nozzle is mounted after a throttle...
$50.00
Add:
Check your flow! Crack pressure on this one is 22psi. (This makes it usable behind the throttle, too.) Peak flow rate is a whopping 25gph. -more than...
$25.00
Add:
Check your flow! Crack pressure on this one is 22psi. (This makes it usable behind the throttle, too.) Peak flow rate is a whopping 25gph. -more than...
$25.00
Add:
Ruggedly constructed from aluminum, these tank taps feature T304 stainless steel filter elements in their bottoms to keep any major crud and such...
$20.00
Add:
Clean fluid supply is a must. This package packages 3/8" x 4AN elbow, 85mic filter, port plug, and ported final connector with 1/4"...
$45.00
... more info
Set pump pressure the easy way with this 3/8" x 4AN elbow/filter/GAUGE outlet combo. It works with either the usual 1/4" (6.35mm) Nylon...
$65.00
... more info
