Manufacturers

Injector Accessories

Billet Injector Cups (1.8T small port)

Billet Injector Cups (1.8T small port)

After dealing with cracked or leaky injector cups, we decided it was time we do something about it. Machined from 6061 aluminum and (most models)...
$80.00
... more info
Billet Injector Cups (1.8T big port)

Billet Injector Cups (1.8T big port)

Genesis -brand Billet 1.8T Fuel Injector Cups are a direct replacement for stock and are priced per set of four . They are machined from 6061...
$80.00
... more info
Billet Injector Cups (Digifant 8V /16V)

Billet Injector Cups (Digifant 8V /16V)

No more lumpy idle, no more misfires... Enjoy these solid metal injector seats. They're good for life vs. each time you swap the manifold or pull...
$59.00
Add:
Unspacers (injector height-adapters)

Unspacers (injector height-adapters)

Have short injectors and the fuel rail doesn't reach down far enough? (e.g. Genesis 550cc in AEB/AGU or 16v). The Genesis "Unspacer";...
$10.00
Add:
Unspacer2 (injector height-adapters)

Unspacer2 (injector height-adapters)

Have super-short injectors and the fuel rail doesn't reach down far enough? (e.g. Siemens 630cc "Shorty" in AEB/AGU or 16v). The...
$10.00
Add:
Fuel Rail Spacer kit

Fuel Rail Spacer kit

Fuel rail spacers do the opposite of "Unspacers". They allow fitment of tall injectors in all 1.8T engines that originally took short...
$10.00
Add:
Mk4 Injector Conversion kit

Mk4 Injector Conversion kit

Got a Mk4 2.0l 8v and wish to fit Bosch EV1 injectors like the 440cc green tops? That's entirely doable so long as you make the bottom o-ring...
$9.00
Add:
Injector O-rings

Injector O-rings

Fuel injectors are a push fit into the seat/fuel rail and are held in place with rubber o-rings. After many years heat cycles, the rubber hardens and...
$1.00
... more info
P&P Harness Adapters (USCAR to Jetronic)

P&P Harness Adapters (USCAR to Jetronic)

Plug n' Play connectors to allow fitment of various injectors (e.g.  Genesis  380cc , 550cc, or 630cc) to cars with...
$9.00
Add:
Splice-in Connector Pigtail (USCAR)

Splice-in Connector Pigtail (USCAR)

Female connector with bare wire leads for splice-in fitment. Works with injectors that have "USCAR" connector type. Parts priced each.
$7.00
Add:
Copyright © 2023 Usually Sideways Rally Team. Powered by Zen Cart