FLOWsafe System (8AN Compact)

SUCK IT UP with 8AN. SEE the data. Enjoy no restriction feeding a water/meth injection pump. Inform an controller or ECU. Supplied along with the failsafe flow sensor are 24" (60cm) of black braided hose and an array of carefully angled 8AN fittings.

This kit upgrades our Compact Street Tank (which is offered separately). It is compatible with pumps with 3/8 threaded tops.

Connect to 12V and ground. Hall effect sensor output is a 12V square wave signal. Send that to an advanced water/meth controller or ECU. Flow rate is proportional to frequency (and is predictably linear from 1 - 20Lpm). 

A ruptured or disconnected hose downstream of sensor always results in massive flow rates. Whereas, a leak before the sensor will produce a notable decrease. As will any blockage in the system. Set upper and lower flow parameters in the controller and a powerful failsafe system is yours to trust.

The FLOWsafe sensor fits between tank and water meth injection pump. USRT's BIG BORE Outlet is shown above it with 400psi FAILSAFE Pressure Sensor attached.

Rubber pads are included to reduce vibration and noise transmitted to the vehicle. Extra clearance is provided for mounting on uneven surfaces.

Tech notes: Inlet restriction and cavitation are eliminated via LARGE diameter flow path. Placement before the pump ensures that pulsation from fast solenoid valves does not corrupt data.