Adjustable Race Swaybar Endlinks (4Motion front)

Stiffer endlinks instantly transmit the roll stiffness that a bigger front swaybar provides. -no more "bOIiinnNngg"  when g-forces are highest. -just linear predictability. Take action.

Skinny stock links bend and bind as the car leans over during cornering. This exponentially varies the amount of roll resistance provided. -a confidence sapping problem for the hardcore driver. When steering angle is reversed, stock endlinks abrubply unload their energy and bounce back to straight position. This completely upsets handling balance.



These swaybar end links are made a bit longer than stock.  This is because when lowering your vehicle, you will need to LENGTHEN your front swaybar end links to compensate for the change in suspension geometry.  These swaybar end links can be adjusted from 14.5" to 15.5" center to center length as shipped.  If you desire, you could also trim off part of the 2" long threaded ends to reduce center to center length to 12 3/4".  Please understand this before ordering and get an idea of what center to center length you desire to be certain these will work for your application.  You want the swaybar end links to sit as vertical as possible !

Replace your car's links and completely transform slalom performance. Look forward to steady state handlng that's predictable and linear vs. "surprising" at the limit of grip.

 

Center bodie made from 303 Stainless Steel hex bar replace the flimsy non-adjustable OEM "spaghetti" links.  These feature super-strong 6,000 lbs radial load capacity via THK sealed ball joints. These are fortified with a proprietary liner on either end to provide many years of noise free operation.  Our ball joints have a built in dust boots to seal out the elements and do not require any maintenance.  These linkages will not deflect under the hardest track corners and will provide the most accurate handling. 

Applications :

This product comes as a set of 2 endlinks and replaces OEM P/N's 1J0-411-315D (1J0411315D) and 1J0-411-316D (1J0411316D) found on the following vehicles and possibly other makes, please verify your OEM part numbers match these listed :

1999-2006 Audi TT MK1 (all)
2004 VW R32 (all)

Note:

The Rod Ends used on these swaybar end links have studs which are 1" in thread length.  Please verify before ordering that this will work on your application.

$195.00

Add to Cart:

Ask a Question

  • Model: V0034
  • Manufactured by: Verdict Motorsports

Contact USRT

  • +1(856)456-3335
  • Hainesport, NJ 08036
  • Email Us

Hours: Monday-Friday 9-5 EST

Copyright © 2024 Usually Sideways Rally Team